X32 CORE: Firmware updates

From behringerwiki
Jump to: navigation, search
  • The X32 CORE firmware can easily be updated by performing the following steps:
  • Download the new console firmware from the X32 CORE product page onto the root level of a USB thumb drive
  • Plug the USB thumb drive into the front panel USB connector while the console is turned off
  • Hold the SCENE/SETUP button depressed while switching the console on. While booting, the X32 CORE will run a fully automatic firmware update, which will take 2-3 minutes longer than the regular boot sequence

When no update file is available on the USB drive, or when it is corrupted, the update mode will remain active, preventing the X32 from booting regularly. Switch the console off and back on without holding the SCENE/SETUP button to boot the console with the existing firmware.